White Lighting Clean Streak Aerosol Degreaser

New cleaning-agent technology that lifts, strips and dissolves the nastiest of contaminants. Evaporates fast and leaves no residue.

Make your hi-performance lubricant work its best.

Clean Streak Metal Prep is a "no-scrub" cleaner that cleans to the base and prepares surfaces for application of high performance lubricants. New lube application, penetration and film adhesion is 100% maximized.

From end of the season wax lube buildup, to thick greasy carbonized grit, to new chain transit coatings..., Clean Streak will cut through it all! Fast action and thorough evaporation.

Clean Streak Metal-Prep Application Tips and Techniques:

Spray Clean Streak directly onto drivetrain components, and allow the grease, grime and grit to run-off the bike. No water rinsing is required, and Clean Streak leaves no residue.

For stubborn contaminates, use a rag or a brush to loosen the encrusted soils, and then spray with Clean Streak.

Clean Streak’s No-Rinse, No-Residue formula is perfect for use on disc brake rotors (Clean Streak should be used to clean the rotors ONLY. Do not use Clean Streak to clean the calipers or pads, and it is recommended to remove the wheel before cleaning the rotors), and although Clean Streak is safe for use on all a bikes components, its intended use is for the removal of contaminates on the drivetrain (it is not intended to clean the frame, handlebars, seat and/or tires).

Be sure to use Clean Streak in a well-ventilated area, and eye protection is recommended.



Shipping Weight: 1.5 lbs.